Duralloy Corten® 0.9mm Matching Weathering Steel Mig Wire 15Kg

Duralloy WeatherCor ER80S-G Weathering Steel MIG Wire

Duralloy WeatherCor is a low-alloy solid MIG wire formulated for joining Corten and other atmospheric corrosion-resistant weathering steels. Its weld deposit is designed to support the strength, durability and weathering characteristics required in exposed architectural, structural and infrastructure applications.

The precision layer-wound wire provides consistent feeding and stable welding performance in workshop and production environments. Its ER80S-G classification places it in the 80 ksi tensile-strength class, making it suitable for higher-strength weathering-steel fabrication when selected and used in accordance with the applicable welding procedure.

Fresh weld metal will initially appear metallic and will weather over time. Final colour and patina development will vary with the base steel, environment, surface preparation and welding procedure.

Features

• Formulated for Corten and other weathering steels.
• AWS A5.28 ER80S-G low-alloy solid MIG wire.
• ASME SFA-5.28 ER80S-G classification.
• 80 ksi tensile-strength class, approximately 550 MPa.
• Helps provide a compatible weathered appearance in exposed fabrication.
• Precision layer wound for consistent wire feeding.
• Stable arc characteristics with reduced spatter and post-weld cleaning.
• Supplied on a 15 kg industrial spool.
• Available in 0.9 mm and 1.2 mm diameters.

Best Used For

• Architectural weathering-steel cladding and facades.
• Bridges, walkways and exposed structural steelwork.
• Outdoor sculptures, signage and landscape features.
• Rail, transport and infrastructure fabrication.
• General fabrication using Corten or equivalent weathering steels.

Recommended Setup

• A MIG/GMAW power source and wire feeder compatible with a 15 kg spool.
• Correct drive rolls, liner and contact tip for the selected wire diameter.
• DC electrode positive (DCEP), subject to the approved welding procedure.
• Argon/CO2 mixed shielding gas selected in accordance with the WPS and base-material requirements.
• Clean, dry joint surfaces and parameters set by the approved WPS.

Package Inclusions

1 x Duralloy WeatherCor ER80S-G Weathering Steel MIG Wire, 15 kg spool.

Shielding gas, welding equipment, drive rolls and torch consumables are not included.

Specifications

Available Sizes

Technical note: Confirm the selected filler metal against the base-material grade, project specification and approved welding procedure before use. Request batch or manufacturer certification where project-specific mechanical, chemical or impact requirements apply.